Archive

October 2015 -

What Are Double Egress Doors?

Are you contemplating on the best type of door to buy? Well, there are different types of doors in the market today, but selecting the ideal one for your needs can be quite daunting. However, double egress doors have been gaining sturdy grounds in the market due to its top-notch qualities. In most cases, buyers who are not familiar with different types of doors tend to confuse double egress doors with double acting doors. In fact, it’s easy to buy what you didn’t intend. The application and purpose of these doors tend to differ greatly. This article with information brought to us by the guys over at AuroraLocksmith.org aims at giving detailed information and a comprehensive guide to double acting doors.

What are double egress doors?

Egress doors can be defined as a type of application that includes a pair of similar doors which swing in opposite direction. It is worth noting that each door will only be operated from the acting leaf side. This is the push side that helps in coinciding with the traffic flow. To accommodate the swinging in opposite directions, egress doors uses a frame with rabbets and stops on the opposite positions. The common places where egress doors are used to facilitate easy and convenient access include;

• Hospital corridors

• Nursing homes

• School corridors

• Clinics and

• Institutions with a large number of people

Double Egress doorsDouble egress doors differ from double acting doors both in application and purpose. While egress doors open in opposite directions, double acting doors can open in both directions due to the pivot hinges also known as the double acting hinge. It can comprise either a single door or a pair of doors where one is considered as the active door. Unlike double egress doors, double acting doors frames opened in a way that the doors swing freely in any direction. The common places of use for double acting doors include grocery stores, supermarkets, storage facilities, warehouses and restaurant kitchens.

Advantages of using double egress doors

• The doors are equipped with an optional hardware application that allows you either to pull or push when accessing the designated area.

• The door frame is usually designed to receive the doors swinging in opposite directions without a center mullion. This enhances and guarantees the safety of the users.

• The frame also contains stops and rabbets in opposite directions. It helps to stop the doors and alleviating the impact of banging hence improving its durability.

• A door with the double egress application tend to provide a quick, but safe entrance and exit into a certain area. This is made possible since the traffic on one side of the door does not collide with the oncoming traffic on the other side.

• In most cases, egress doors and frames are made of steel. When they are locked properly, they provide optimum security. Steel is also durable meaning the door’s durability is high and it can last for a considerable long time.

• Double egress doors are versatile and can be used in various places with a large flow of traffic like hospitals and schools.

Things worth noting about double egress doors

Double Egress doors1As a measure of improving security in a certain area, egress doors can be locked and be used in emergency cases only. Since there are different types of locks that can be installed in these type of doors, you need to choose wisely depending on your needs and purpose of the door. An electromagnetic lock that is installed together with a motion sensor is recommended to allow easy access when there is need to. A push button is also necessary so as to open the door from the egress side, more so when there is fire alarm and/or power failure. While some technicians prefer shear locks, others recommend the use of egress mag-locks or the exit devices. A shear lock contains an electromagnet attached to the frame head and a steel armature at the top of the head. When the door is closed, the magnet energizes and pulls the steel armature that create a bond and closes the door.

Since beauty lies in the eyes of the beholder, you are free to select what is right for your needs. Security, noise, durability and reliability are among the key factors to consider when deciding on the best type of door to buy. To improve on durability, make sure you have the right technician to install the door at your premise.

Social Share Toolbar

Guide When Choosing Door Locks

For most people, security is placed at the highest priority when choosing door locks for their homes, followed by price and overall appearance. Selecting the most effective door locks for your doors depends on whether a door is interior or exterior, as a result of every form of door needs fully totally different lockup mechanisms. Hence, it’d not be appropriate to put a bar on a toilet door or a push-button privacy lock set on a front entry door. However, before we get into that, let’s first acquire additional knowledge concerning door locks and let us learn which of them are the sturdiest, brought to you by PortlandLocksmithPros.com.

ANSI: Locks & Deadbolts’ grading System

The National Standards Institute (ANSI) coined 3 types of door lock grades to assist determine the standard and sturdiness of lock sets and deadbolts. Every product should pass operational and security tests, together with cycles, door strikes and weight take a look at. One cycle consists of the knob or handle turning fully to retract the latch bolt and open the door, then it’s discharged, permitting the door to re-latch. ANSI Grade one is that the best option for exterior residential door locks.

Grade one – Highest

Grade 1 LockThis is the highest grade security on the market. It meets industrial building needs and is available for residential uses via deadbolts. There don’t seem to be commonplace knobs, handle sets or mortise lock set that may meet ANSI Grade one certifications, solely industrial lever handles.
• Knobs should pass a test of being able to complete at least 800,000 cycles, withstand six door
strikes and a 360 pound weight.
• Deadbolts should face up to 250,000 cycles and ten door strikes (hammer test)

Grade two – Higher

grade 2 lockMeets light-weight industrial building necessities; exceeds commonplace residential security and building requirements.
• Knobs should pass a test of being able to complete at least 400,000 cycles, withstand four door strikes and a 250 pound weight
• Deadbolts should face up to 150,000 cycles and five door strikes (hammer test)

Grade three – Sensible

Grade 3 lockSolely meets residential building needs and provides for the least residential security.
• Knobs should face up to 200,000 cycles, a pair of door strikes and a one hundred fifty pound weight
• Deadbolts should face up to 100,000 cycles and a pair of door strikes (hammer test)

What Kind of Door Lock is Right for your Home?

Considering the different types of exit devices available and as a part of a physical security arrangement for the everyday home, install Grade one (ANSI designation) bolt sort locks on all exterior doors, all doors between connected garages and also the living areas, and any exterior man-door on a garage, connected or detached.

What quite Door Locks Do Building Codes Require?

Locks on exterior doors measures what the public perceives once considering upgrading the security of their homes.
Many people assume that their area building codes need a minimum level of quality and security for the door locks that must be placed on their homes. The very fact is most building codes do not even need a lock on exterior doors, how much more for a minimum level of quality.
This places the choice of the door lock on the house owner or on his or her contractor. Most contractors aren’t “lock experts” and that they choose the low valued locks. That leaves it to the house owner to either settle for the lock their contractor provides them or to pick one themselves. The house owner will build an improved choice knowing what he really wants.

Door Locks from a Burglar’s Perspective

When making a choice for door locks, decide it from the burglar’s perspective. Burglars do better when making an entry through a door being fast and simple. However, studies have shown that an honest quality lock could be a deterrent. On an interview made on intruders, they would all say that seeing a sturdy deadbolt installed on a front door usually make them back off.

A thief will enter the house through a door employing a number of methods:
• Walking directly through an unlock door.
• Kicking the door
• Using Pick Locks.
• Beating the door till they give way.
• Using a bar to spread the door.
• Employing a power tool.
• Intruders can usually try to pry off the lock employing pipe wrenches or pliers.
• Using duplicate keys.

Security for our family and properties are of utmost concern, when choosing for the different types of exit devices available in the market. The above guideline maybe of big help.

Social Share Toolbar

The Best Brands of Emergency Exit Devices

An emergency does not knock and wait for permission to enter. Instead, it will get you unaware. Having realized this, everyone is on the high end trying to find most suitable ways of dealing with emergencies. Continued research and innovation has bored fruits in the recent past with the manufacture of panic bars, occasionally referred to as exit device, panic device, crash bar or push bar. These devices are installed on house, office or any other place with doors to aid in quick unlocking during emergencies. It is a legal requirement to have such devices in places where many people meet. The bar is metallic and spring loaded usually fixed on the inside of a door that opens to the outside. The lever on this device allows the door to open easily when pressed. This allows immediate and quick evacuation in case of an emergency.

Since it is inevitable to have your public building pass inspection without emergency exit devices, you are left with no choice but have them installed. However, you also do not want to fail the inspection test because of poor brands installed on your doors. In this article, with some useful information provided by the guys at RentonLocksmith.net, we are going to progress on to look at some of the best brands of emergency exit devices on the market you can use for your doors.

Von Duprin devices

Von DuprinVon Duprin is one of the leading brands with their release of leading security and emergency exit door devices. They have provided peace to business owners regarding security of the people in their buildings. Some of their emergency exit devices include:

· Von Duprin 22 rim device

Its functions include

Dummy trim, exit only, night-latch-key retract, knob, night latch operational pull, lever-06 standard and thumb piece.

3 or 4 inches length

Included 299 strike

Door thickness should be 1’. “ for standard doors, 2’, 2’. ¼ “ for wood and metal doors.

Door length 4’(4’ device with door 2’ 10” to 4’) 3’ (3’ device with door 2’ 4” to 3’)

Latch bolt deadlocking

Sex bolt optional

Finishes include both SP28 and SP313 for sprayed aluminum and sprayed dark bronze respectively.

· Von Duprin 2227 Surface Vertical Rod Device

Von Duprin vertical surface series 2227 device is used to provide a very good exit strategy when the door is locked from the outside. For over 100 years, von Duprin has produced this device in seven different finish colors to match most of the décor peole want. It has features similar to those listed for von Duprin 22 rim device.

· Von Duprin 33A/3527A Surface Vertical Rod Device

Its features include

dummy trim, exit only, night-latch-key retract, knob, night latch operational pull, lever-06 standard and thumb piece.

Door thickness should be 1’. “ for standard doors, 2’, 2’. ¼ “ for wood and metal doors.

Door length 4’(4’ device with door 2’ 10” to 4’) 3’ (3’ device with door 2’ 4” to 3’)

On the return stroke, a fluid damper is introduced to decelerate it and eliminate the noise that comes with a good number of exit devices.

Includes 248-L, 266 and 304L Strikes

It has a grooved mechanism case

No cylinders included

Finish include satin chrome, anodized aluminum, duranodic dark bronze, satin bronze, satin brass, bright brass, satin nickel, bright chrome and black.

Taco devices

TacoTaco is also another top brand on the market that has been known to supply solutions to access control for over 45 years. Its devices include Taco VR531 Vertical Panic Exit Device, Taco VR531 Vertical Panic Exit Device, Taco ED301 Reversible Rim Type Cross bar Exit Device and Taco VR331 Series Reversible Vertical Type Exit Device. The entire taco brand devices are easy to install with most fitted with an alarm kit.

Detex devices

Detex is another top brand producer for exit devices. The company produces quality and super heavy-duty fire and panic exit hardware. Detex has specialized in production of single and double door exit device. A mounting plate and a system used to locate strike are available to ensure you install the device in a very accurate way.

Falcon devices

Another top brand is falcon. They produce clean appearing exit devices with a variety of styling and practical features. To attain durability and lightweight at the same time, the company uses aluminum push bars and levers.

Adams rite devices

Adams rite devices are are also known for production of clean, ease to install and durable constructions of exit devices for both emergency and security purposes.

Social Share Toolbar

Reasons Why Your Exit Door Push Bar Needs to Work Properly

Every little component of an infrastructure, regardless of use, is crucial. The smallest piece of nut may hold together the most used parts of a train, and one nail can make a huge difference in sustaining the strength of a wooden home’s flooring.
No matter the size, each part should be chosen with care and meticulous consideration of quality and durability. Safety should always be at the forefront when putting up, operating, and maintaining any infrastructure, especially when talking about public buildings.
Throughout history, there have been countless disasters that turned public theatre houses into living hells, where people, young and old, were unfortunately unable to escape. Many offices and buildings did not provide an easy way out for its dwellers during emergencies because they were too busy installing locks and security systems to prevent robbery. Panic and confusion strike most during these times, and an uncooperative exit door can only make the situation worse. GreshamLocksmith.org walks us through some important information.

What is an Exit Door Push Bar?

There are many types of locks and security mechanisms that are used in buildings and edifices today. From the most mechanical to the most advanced and digital locks, technology has allowed humankind to experiment on what works best for their specific needs. History and experience have taught people that, while securing their premises from unauthorized access is important, it is equally fundamental to provide an easy, unobstructed exit for when the building is occupied.
An exit door push bar is also called a panic bar. From its name, a panic bar is meant to allow for easy access during times of panic. Oftentimes, and based on common logic, panic bars are tools used to open locked doors from within a building. Additionally, most of these exit door push bars can be seen in commercial places where a relatively huge volume of traffic is expected to come in and out of the premises.

How does an exit door push bar work?

panic bar doorExit door push bars, regardless of type and size, work similarly. They are opened by pushing the horizontal metal bar. Modern push bars are dual purpose—they are easy to open from the inside, and they can be programmed to lock automatically as they are closed. This mechanism is made possible by the use of a loaded spring inside the bar.
Push bars can also be used in usual entryways without the hassle of having to push the bar from inside each time a person wants to enter the premises. A handle on the opposite side that can be pulled is the only thing that needs to be added. Of course, the latch on the push bar must be retained open.

How important are they?

panic bar door installExit doors must always be in their proper working condition. There are countless reasons why, but the following are the most essential to remember:
– Without a properly working exit door push bar, your building and safety permits will not be granted.
– An exit door push bar is a make or break in saving people’s lives during emergencies. It will define how easily people will be able to leave the premises in cases of fire, earthquakes, and other calamities.
– Getting a low-quality push bar will not only mean danger, but will also equate to additional maintenance and repair costs in the future. This can also lead to being fully non-functional. When this happens, you can lose your building permits and put your employees at risk.
– A faulty exit door push bar may mean that your building or commercial space is unsecured, and can be accessed by intruders anytime.
Depending on the size and type of door, as well as the nature of the premises where it will be used, different push bars can be purchased from reliable security product companies. For all conditions, only the most trustworthy security product solutions provider should be contacted if you want to protect your business well.
It is never worth it to save on cheap and low-quality push bars in exchange of your employees’ safety, nor is it wise to entrust a building’s security equipment to fly-by-night or undependable companies. These companies are in charge of providing and installing the equipment, which means they are knowledgeable in accessing, maintaining, and at some point, breaking into them. In the end, push bars and all other security tools and equipment should only come from reliable experts who will value your business’s security and safety like you do.

Social Share Toolbar

Panic Devices or Fire Devices? Which One Should You Invest In?

Any building or infrastructure is guided by certain standards that are set by the local government. This is to ensure the quality of the building, as well as the safety of the people who will be using the building. Without a clear and effective safety plan for emergencies, employees and residents of such structures will be in danger of the inability to exit easily whenever there is a calamity, a disaster, or any unfortunate event that may take place.
Remember the 9/11 terrorist attacks? That was a very horrible sight of people running for their lives, some even jumping out of the building due to panic. Almost 3000 people died during the attack, and millions were affected afterwards. That particular event shook the whole world and paved the way for another series of attacks in retaliation to the terrorists’ inhumanity. There is no way we can control such things from happening again, or anything similar, that is. In reality, the only thing we can do is prepare for the worst, and equip ourselves with the best and most trusted devices that will give us better chances of surviving such unwanted occurrences.
And while almost everyone is concerned about their safety, building managers are sometimes confused as to which safety devices they should invest in—panic devices or fire devices? There are plenty of equipment that can be used to protect residents and dwellers of infrastructures, big and small, private and commercial. However, not everything that is advertised is actually good, durable, and good for long term use. Moreover, they may not always be good for your finances. One of the most confusing decisions that you will have to make is whether you should install panic devices or fire devices for emergencies. BurbankLocksmith.org tells you the differences.

What are panic devices?

panic devicePanic devices are required to be installed on doors that provide easy egress to people in places where high volume of traffic is normally expected. These places include schools, assembly areas, and dangerous habitations. Panic devices are a type of hardware that involves a hand bar with a size that is at least half of the door width. Otherwise, the panic device will not pass standards set by the UL 305, known as the Panic Hardware test standard.
Panic devices are now available in different models, but technically work using the same mechanism—allowing for easy opening of the door by applying force on the crossbar or touchpad. The same code requires a maximum of 15 pounds in force to be able to open the door.
The main difference that sets panic devices apart from fire doors is the dogging feature, which can be mechanical or electrical, depending on the type of the device. This feature enables you to hold the latch in a retracted position, so that people can continuously enter and exit the premises without constantly pushing the touchpad. As a result, your device is spared from quick wear and tear.

What are Fire Devices?

fire exitFire devices, also known as fire exit hardware, are used for fire doors under particular standards set by the UL 10C – Positive Pressure Fire Tests of Door Assemblies. Fire devices are to be installed with both panic and fire labels.
They do not have the mechanical dogging feature, since fire doors are supposed to lock automatically whenever the door closes. This is to make sure that, in the event of pressurized air from fire, the door will be closed and will prevent it from spreading to the other side. Fire devices, however, can be retracted using electric latch dogging systems that are linked to the fire alarm system. Others use hold-open door closers to keep them open when needed.
Most often than not, fire devices are not installed on the exterior egress ways of a premise, since they are often locked and secured from outside intruders.
Which one to choose?
Panic and fire devices are equally important and serve different purposes. While the best way to ensure safety is to install both on strategic doors, one can also choose one over the other at a sooner time, when the budget does not allow for both. Panic devices should be chosen, at this point in time, since they are focused on providing easy exit ways for people in the premises. Saving the entire building from fire using fire devices can come thereafter.

Social Share Toolbar

Locksmiths Are The Best To Call For Exit Bar Services

Various types of locks and locking devices are available in the market for providing safety to the home and business owners. Exit bar is a type of locking device. Sometimes, this is called as the panic bar. If you go for minute details you can differentiate between an exit bar and a panic bar. When you purchase an exit bar from the market, you need to install it on your door with the help of professionals. Apart from that, there can be problems with the exit bar at times. Again you need the help of professionals to sort out the exit bar-related problems. You should know which kind of professionals are the best in this field. This article brought to you by avondalelocksmith.org guides you to find the best professionals for exit bar services.

What is an exit bar?

An exit bar is a simple locking device. It consists of a bar which is used across the inside of a door. You need to push the exit bar to release the door latch. This bar is generally pushed during emergency situations. The design of the bar goes seamlessly with the safety compliance. This bar is fixed to the door with the help of a spring. When you press the lever, the door gets opened. There can be huge crowd which need to go out through the emergency exit. These exits can be pretty hazardous.

Exit bar services

* Confusion with the different types and styles of the exit bars

exit barGenerally people get confused with the variants of the exit bars available in the market. In general, there are three types of exit bars available in the market. The crossbar, the paddle and the touchpad are the three types of exit bars. The crossbar is generally used when there is not much importance of safety for the occupants. This device can be faulty at times. Even if you use the device, you can add safety measures to it with the help of the professionals. The paddle finds very less use in the industry because of its ruggedness and looks. The touchpad is a type of exit bar which has many exciting features. This device can be electronically lodged to your doors.

* Which brand provides the best exit bars that suit your needs?

You may be able to tell your needs, but you may not be able to know whether the features of different exit bars provided by different brands would satiate your needs. Experts have experience in the field. They know which brand provides what type of features for your specific needs. Apart from that if you have enough knowledge about the exit bars, you can tell the professionals to install certain types of devices on your door.

* Exit bar installation

exit bar installationExit bar devices come with instructions to install those on your doors. You may not be able to do it by yourself. You may need certain tools to install these devices on your doors. If you decide to purchase those tools to install those devices on your doors, you may end of costing huge amount of money. There is no guarantee that you will be able to install successfully and efficiently. Once again you need to call the professionals. It is better to call the professionals to do their job.

* Exit bar repair

Exit bars are hardly required to be opened in some installation. In some other installations, you may need to use the exit bars frequently because of security reasons. This may lead to wear and tear of the exit bars. You may not be able to repair the exit bars on your own. You need to call the professionals to avoid the risk of security.

Locksmiths are the best to call for exit bar services

* Locksmiths have expertise on different services mentioned above related to exit bars.

If you are about to install the exit bars for the first time, they assist you in getting the best type of exit bars of the best brands available in the market. You can also negotiate with them about this matter in detail.

* Locksmiths provide emergency services

Locksmiths are well aware of the emergency situations pertaining to exit bars. You just need to give them a call intimating about the nature of the problem.

Final points

Exit bars are meant for your safety in emergency situations. You shouldn’t waste time in experimenting on these bars because locksmiths are the best professionals for these services.

Social Share Toolbar

Getting Your Commercial Property Doors Up To Code

If you have a commercial property then it is a must for you to make sure that the property doors are up to code. A lot of us do not care about this fact and many of us still do not know about the codes either. Hopefully, this article brought to you by Gilbert Locksmith Pros In Arizona will help you to get an idea about the importance of having your doors up to code.

Getting your commercial property doors up to code is a crucial task. Obviously, you will find all the information that you need in a book called ADA or Americans with Disabilities. This is a 279 page book which holds all the information that you need for getting your commercial property doors up to code. Unfortunately, most of us do not have time to read this book and that can easily cause trouble.

door inspectionThe government authority will soon start inspecting the doors of commercial properties and if you have a door that is not up to code, you will face troubles including big fines. The regulatory agencies including NFPA already declared that each commercial space will face a yearly inspection for doors, fire escape and for even stairs. The door codes will be considered pure laws and the authority is not ready to listen to your excuses if the laws are broken.

Getting your commercial property doors up to date is more important now than any time ever. If you don’t have up to code doors then you will be considered liable for injuries and deaths if they occur because of the safety issues of your place. The insurance providers will also take this into account if you don’t have up to date doors.

If you manage a hospital, school or similar buildings then you might face problems with accreditation board if door codes are not maintained. Everyone soon will have to show records that they meet life safety codes to receive benefits such as accreditation, grants, tax advantage and so on.

Now you already understood that getting your commercial property doors up to code is important but the question is, how will you be able to ensure that your doors are up to code? Fortunately, there are methods to do so and you should go for one of those methods immediately to keep your property safe.

door inspectionnnThere are seven compliances for doors in ADA. You will have to make sure that your commercial doors maintain all seven of the compliances mentioned in ADA. The first one of them is clear opening width which is a simple one to maintain. There are also compliances such as thresholds, hardware issue, closing speed, opening force, surface method and vision lights. All of the compliances are mentioned in the 404 section of ADA and you should at least read this section if you don’t want to read the whole big book.

If you want to fix the clearance problem then you can easily install new hinges to your door. Let’s use an example to understand the situation in an easier manner. Let’s say that your commercial home door is having a compliance issue with adjustability and flexibility. This is a problem and this problem will cause you lots of troubles if you don’t solve it within time. To solve this problem, you can either call a mechanic or install new hinges on your own. Simply go for surface hinges like SL57 which will allow your doors to open widely. These hinges will solve your door issue and that will solve the compliance issue.

You should not take the code issue as a liability. It is a responsibility and it is also not a tough task to complete. The good part is that if you manage and check your door codes once this year then you won’t have to redo this for at least five to ten years. Doors are easy to manage and they do not need regular attention to work. Even though doors do not need regular maintenance, it is always better to check them once in every month to make sure that you are not having any unexpected faults in your doors. Being careful is the only way to keep your commercial area safe from door related problems.

Social Share Toolbar

Learning the Basics of Exit Devices

An exit device is installed on the secure side of an out swinging door. These devices are designed to restrict access towards the inside while providing free egress. Exit devices were developed after several incidents of building fires in the United States that claimed hundreds of lives. Through the development of these devices, problems of being crushed against the door have significantly diminished. Such problem previously existed as people did not have the knowledge on how to open closed doors or they simply did not have the time to unlock and open the door, which resulted to accidents and injuries. The following is some useful information brought to you by the guys down at Diamondback lock and key in Chandler.

Traditional Exit Device

traditionalEarly exit devices were designed using a metal tube placed between two cases. The cases were placed on each side of the door. The first case is considered the active case. This comes with a latch bolt which would retract when the tube is pushed downward or forward. This would allow the door to swing open.

The traditional design of the exit device is continuously being offered by several manufacturers. However, with recent developments in the industry, this device has evolved over the past decade. In fact, exit devices now come with rail style mechanism that makes use of forward mounted push pad. A horizontal force applied to the pad will release the door.

The Three Types of Exit Devices

Today, there are three common types of exit devices. These are the rim, the mortise lock and the vertical rod.

Rim Exit Devices

The most common type is the rim exit device. This device is designed with a latching mechanism that is similar to rim locks. The rim locks and rim exit devices are mounted and placed on the secured side of the door. This type of exit device is considered a self contained door lock mechanism. Its latch is located at the center chassis or case. In addition, the latch of this type of exit device is surface mounted, which slides over the strike that is also mounted on the surface. This type also comes with a dead latching mechanism, which prevents that latch from being forcibly retracting. This prevents any unauthorized access.

Mortise Lock Exit Devices

mortiseThe mortise lock style on exit devices, on the other hand, is incorporated with a mortise lock without the deadbolt being mounted on its door pocket. For this style, the mortise lock is considered a part of the exit device. It is important to take note that a standard mortise lock is not designed to work as an exit device. The mechanism of this type of exit device allows the door to swing out whenever the push bar is pressed. When this happens, the spindle will rotate and retract the latch bolt, allowing the door to swing out. In addition, this device comes with an exterior trim which contains the lock cylinder. This device is often installed on the active leaf of a pair of doors.

Vertical Rod Exit Device

The vertical rod exit device is available in concealed versions. This device comes with a rod which connects the push pad to the bottom and top latches. This type of exit device can be configured as a top rod or top and bottom rod.

Installation Options

Most types of exit devices can actually be installed on wood, aluminum and hollow metal doors, provided that the stile is compatible with the device. However, there are also exit devices that are specifically created for aluminum doors that come with narrow stiles. This type of exit device comes with a narrow center chassis or case. This standard stile measures more than two inches wide while the narrow stile measures less than two inches wide.

An exit device can be installed with or without an exterior trim. There are varied trim choices to choose from. The trim types include keyed trim, pull handles, lever trim and electrified trim. In choosing the trim, it is important to take note that the stile choice will affect the dimensions of the exit device as well as the trim.

It is essential to take note of the basic information of exit devices before purchasing and installing one on your door. The choice of exit devices will depend on various factors like the type of door that you have as well as your door needs and preferences.

Social Share Toolbar