October 27, 2015 -

What Are Double Egress Doors?

Are you contemplating on the best type of door to buy? Well, there are different types of doors in the market today, but selecting the ideal one for your needs can be quite daunting. However, double egress doors have been gaining sturdy grounds in the market due to its top-notch qualities. In most cases, buyers who are not familiar with different types of doors tend to confuse double egress doors with double acting doors. In fact, it’s easy to buy what you didn’t intend. The application and purpose of these doors tend to differ greatly. This article with information brought to us by the guys over at aims at giving detailed information and a comprehensive guide to double acting doors.

What are double egress doors?

Egress doors can be defined as a type of application that includes a pair of similar doors which swing in opposite direction. It is worth noting that each door will only be operated from the acting leaf side. This is the push side that helps in coinciding with the traffic flow. To accommodate the swinging in opposite directions, egress doors uses a frame with rabbets and stops on the opposite positions. The common places where egress doors are used to facilitate easy and convenient access include;

• Hospital corridors

• Nursing homes

• School corridors

• Clinics and

• Institutions with a large number of people

Double Egress doorsDouble egress doors differ from double acting doors both in application and purpose. While egress doors open in opposite directions, double acting doors can open in both directions due to the pivot hinges also known as the double acting hinge. It can comprise either a single door or a pair of doors where one is considered as the active door. Unlike double egress doors, double acting doors frames opened in a way that the doors swing freely in any direction. The common places of use for double acting doors include grocery stores, supermarkets, storage facilities, warehouses and restaurant kitchens.

Advantages of using double egress doors

• The doors are equipped with an optional hardware application that allows you either to pull or push when accessing the designated area.

• The door frame is usually designed to receive the doors swinging in opposite directions without a center mullion. This enhances and guarantees the safety of the users.

• The frame also contains stops and rabbets in opposite directions. It helps to stop the doors and alleviating the impact of banging hence improving its durability.

• A door with the double egress application tend to provide a quick, but safe entrance and exit into a certain area. This is made possible since the traffic on one side of the door does not collide with the oncoming traffic on the other side.

• In most cases, egress doors and frames are made of steel. When they are locked properly, they provide optimum security. Steel is also durable meaning the door’s durability is high and it can last for a considerable long time.

• Double egress doors are versatile and can be used in various places with a large flow of traffic like hospitals and schools.

Things worth noting about double egress doors

Double Egress doors1As a measure of improving security in a certain area, egress doors can be locked and be used in emergency cases only. Since there are different types of locks that can be installed in these type of doors, you need to choose wisely depending on your needs and purpose of the door. An electromagnetic lock that is installed together with a motion sensor is recommended to allow easy access when there is need to. A push button is also necessary so as to open the door from the egress side, more so when there is fire alarm and/or power failure. While some technicians prefer shear locks, others recommend the use of egress mag-locks or the exit devices. A shear lock contains an electromagnet attached to the frame head and a steel armature at the top of the head. When the door is closed, the magnet energizes and pulls the steel armature that create a bond and closes the door.

Since beauty lies in the eyes of the beholder, you are free to select what is right for your needs. Security, noise, durability and reliability are among the key factors to consider when deciding on the best type of door to buy. To improve on durability, make sure you have the right technician to install the door at your premise.


Guide When Choosing Door Locks

For most people, security is placed at the highest priority when choosing door locks for their homes, followed by price and overall appearance. Selecting the most effective door locks for your doors depends on whether a door is interior or exterior, as a result of every form of door needs fully totally different lockup mechanisms. Hence, it’d not be appropriate to put a bar on a toilet door or a push-button privacy lock set on a front entry door. However, before we get into that, let’s first acquire additional knowledge concerning door locks and let us learn which of them are the sturdiest, brought to you by

ANSI: Locks & Deadbolts’ grading System

The National Standards Institute (ANSI) coined 3 types of door lock grades to assist determine the standard and sturdiness of lock sets and deadbolts. Every product should pass operational and security tests, together with cycles, door strikes and weight take a look at. One cycle consists of the knob or handle turning fully to retract the latch bolt and open the door, then it’s discharged, permitting the door to re-latch. ANSI Grade one is that the best option for exterior residential door locks.

Grade one – Highest

Grade 1 LockThis is the highest grade security on the market. It meets industrial building needs and is available for residential uses via deadbolts. There don’t seem to be commonplace knobs, handle sets or mortise lock set that may meet ANSI Grade one certifications, solely industrial lever handles.
• Knobs should pass a test of being able to complete at least 800,000 cycles, withstand six door
strikes and a 360 pound weight.
• Deadbolts should face up to 250,000 cycles and ten door strikes (hammer test)

Grade two – Higher

grade 2 lockMeets light-weight industrial building necessities; exceeds commonplace residential security and building requirements.
• Knobs should pass a test of being able to complete at least 400,000 cycles, withstand four door strikes and a 250 pound weight
• Deadbolts should face up to 150,000 cycles and five door strikes (hammer test)

Grade three – Sensible

Grade 3 lockSolely meets residential building needs and provides for the least residential security.
• Knobs should face up to 200,000 cycles, a pair of door strikes and a one hundred fifty pound weight
• Deadbolts should face up to 100,000 cycles and a pair of door strikes (hammer test)

What Kind of Door Lock is Right for your Home?

Considering the different types of exit devices available and as a part of a physical security arrangement for the everyday home, install Grade one (ANSI designation) bolt sort locks on all exterior doors, all doors between connected garages and also the living areas, and any exterior man-door on a garage, connected or detached.

What quite Door Locks Do Building Codes Require?

Locks on exterior doors measures what the public perceives once considering upgrading the security of their homes.
Many people assume that their area building codes need a minimum level of quality and security for the door locks that must be placed on their homes. The very fact is most building codes do not even need a lock on exterior doors, how much more for a minimum level of quality.
This places the choice of the door lock on the house owner or on his or her contractor. Most contractors aren’t “lock experts” and that they choose the low valued locks. That leaves it to the house owner to either settle for the lock their contractor provides them or to pick one themselves. The house owner will build an improved choice knowing what he really wants.

Door Locks from a Burglar’s Perspective

When making a choice for door locks, decide it from the burglar’s perspective. Burglars do better when making an entry through a door being fast and simple. However, studies have shown that an honest quality lock could be a deterrent. On an interview made on intruders, they would all say that seeing a sturdy deadbolt installed on a front door usually make them back off.

A thief will enter the house through a door employing a number of methods:
• Walking directly through an unlock door.
• Kicking the door
• Using Pick Locks.
• Beating the door till they give way.
• Using a bar to spread the door.
• Employing a power tool.
• Intruders can usually try to pry off the lock employing pipe wrenches or pliers.
• Using duplicate keys.

Security for our family and properties are of utmost concern, when choosing for the different types of exit devices available in the market. The above guideline maybe of big help.